BashBurn : problem... - gentoo-srbija.org

Forum index ›› Administracija › BashBurn : problem...

AUTOR

PORUKA

slavko

Član
Učlanjen: 17 Jan 05
Poruke: 60

profil¬ poruka¬

Oglašeno: 29 Jan 05 22:20

Instalirao sam BashBurn i nakon nekog vremena hteo da nesto narezem i ujedno da ga probam. Naravno prvo sam ga konfigurisao a zatim hteo da obrisem jedan cdrw ali bez uspeha. Izlaz:

Blanking cd...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling
cdrecord: Warning: Running on Linux-2.6.9-gentoo-r1
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
cdrecord: Warning: SCSI transport does no longer work for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
TOC Type: 1 = CD-ROM
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identifikation : 'CD-W540E '
Revision : '1.0F'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 4127760 = 4031 KB
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
Plain blanking failed. Trying to force...
cdrecord: Warning: Running on Linux-2.6.9-gentoo-r1
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
cdrecord: Warning: SCSI transport does no longer work for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Success. read disk info: scsi sendcmd: no error
CDB: 51 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 4
cmd finished after 0.000s timeout 240s
cdrecord: Cannot get disk type.
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 9600s
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: OPC failed.
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 9600s
cdrecord: Cannot blank disk, aborting.
Blanking was not successful. You should replace this cd.
Press [ENTER] to return to main menu.

Path za blanking je upisan /dev/hdd (TEAC CD-W540E) . Opcija za mount mi daje izbor za samo jedan uredjaj (/dev/cdrom)?
U cemu je problem? Pozdrav!

slavko

Član
Učlanjen: 17 Jan 05
Poruke: 60

profil¬ poruka¬

→ RE: BashBurn : problem... Oglašeno: 29 Jan 05 23:25

Evo odmah da se izvinim problem je resen. U pitanju je moj uredjaj za rezanje koji ne podrzava vece brzine od 10x i ne prepoznaje ih. Ovaj koji sam hteo da obrisem je 16-24x od mog brata. Probao sam drugi... stari dobri TDK-4X i njega je prepoznao odmah.
Jedino ovo za mount me zbunjuje. Jos jednom izvinite za postavljeni problem koji u ovom slucaju nije problem.

z10n

Site Admin
Učlanjen: 27 Oct 04
Lokacija: privileged mode
Poruke: 913

profil¬ poruka¬

→ RE: BashBurn : problem... Oglašeno: 30 Jan 05 05:42 Izmenio: Moderator

slavko

Path za blanking je upisan /dev/hdd (TEAC CD-W540E) . Opcija za mount mi daje izbor za samo jedan uredjaj (/dev/cdrom)?
U cemu je problem? Pozdrav!

Kako si "krstio" {$cdrw}?
Imaš li u /dev symlink za hdd na {$cdrw} i validno sređen fstab?

slavko

Član
Učlanjen: 17 Jan 05
Poruke: 60

profil¬ poruka¬

→ RE: BashBurn : problem... Oglašeno: 30 Jan 05 11:38

/etc/fstab:

/dev/cdrom /mnt/cdrom iso9660 noauto,user,ro 0 0
/dev/cdrw /mnt/cdrw iso9660 noauto,user,ro 0 0

Iz /dev direktorija sam uradio: 'ln -s hdd cdrw' i mount radi. U /dev/cdroms/cdrom se pojavio jos jedan link cdrom1. Ovaj koji sam uradio se normalno nalazi u /dev direktoriju? Posto prvi put koristim 2.6 kernel mozda jos nesto treba...

slavko

Član
Učlanjen: 17 Jan 05
Poruke: 60

profil¬ poruka¬

→ RE: BashBurn : problem... Oglašeno: 30 Jan 05 12:44

Da ne bih otvarao novu temu, jedno zapazanje u vezi problema nforce-audio. Naime citajuci izlaz negde pri kraju kaze:

/usr/src/linux/include/asm/hw_irq.h:28: error: 'NR_IRQ_VECTORS' undeclared here (not in a function)
/usr/src/linux/include/asm/hw_irq.h:32: error: 'NR_IRQS' undeclared here (not in a funktion)
make[1]: *** [nhw.o] Error 1
make[1]: Leaving dorectory '/var/tmp/portage/nforce-audio-1.0.0261/work/nforce/nvaudio
make: *** [all] Error 2

Usao sam u /usr/src/linux/include/asm/ i pogledao fajl hw_irq.h i nasao linije 28 i 32:
[code:]

lin 28> extern u8 irq_vector[NR_IRQ_VECTORS];
#define IO_APIC_VECTOR(irq) (irq_vector[irq])
#define AUTO_ASSIGN -1

lin 32> extern void (*interrupt[NR_IRQS])(void);

Posto ne volim da radim nesto napamet.... da li mogu da komentarisem ove dve linije (meni kao laiku se cini da se tu radi asembleru i njegovim instrukcijama sa hardverom....). Pozdrav!

WWW.GENTOO-SRBIJA.ORG	HOME FORUMFAQ WIKI DOKUMENTACIJA
chown -R nobody:nobody /*	Četvrtak, 08 Januar/2009

zapamti me

slavko

slavko

z10n

slavko

slavko